Showing 229–240 of 462 results

MatrixBusTM XI-4 Four-zone Expansion Module

Main Features • Four hardwire zone addition capacity • Fail-safe and fail-secure option • Supervised by panel for wire tamper • On-board cover and wall tamper detection • FLASH firmware upgradeable • LED status and problem indicator • Eight different options to connect wired detectors PROFESSIONAL GRADE FEATURES • Compatible with Rosslare’s AuraSys P6 wired control panel and other MatrixBus accessories • Cost effective and modular installation anywhere on the bus near the devices to be controlled • Jumper selectable zone addressing

MatrixBusTM XO-2 Tow PGM Expansion Module

Once the expansion module is connected to the MatrixBus, up to two devices can be controlled by the relays via a dry-contact rated at 12V 5A. Up to four relay Programmable Outputs (PGMs) can be added to the system’s main board by using a two-PGM expansions or one four-PGM expansion, giving the AuraSys P6 tremendous versatility.

MD-08 Wiegand to RS-232 Output Converter

MD-08 Wiegand to RS-232 Output Converter The MD-08 is an easy-to-use Wiegand to RS-232 converter. It allows you to connect a Wiegand reader directly to one of your PC's COM ports. The MD-08 allows you to set employee and system codes without having to use a reader attached to a controller in the network

MD-14U/62U USB Cables

MD-14U/62U USB Cables MD-14U – RS-485 to USB cable for Access Control MD-62U – RS-232 TTL to USB cable for Intrusion

MD-63 Memory Key for AuraSysTM Panels

The MD-63 Memory Key is compatible with Rosslare’s AuraSys P-6 security system.

MD-D02B 2-Reader Expansion Module for AC-225x-B Control Panel

MD-D02B is a plug-in expansion module for Rosslare’s AC-225x-B access control panels that provides a 2-reader interface, 4 supervised inputs with end-of-line (EOL) resistor protection, and 4 relay outputs (5 Amp Form-C N.O./N.C.) to the panel. Installation of the module takes under one minute with the tailored expansion port in the panels and auto-recognize by the panel. Once it is installed and the panel is powered on, the expansion is recognized by the AxTraxNG server, and the MD-D02B can be programmed for access control and automation. Advanced communication with the controller allows for firmware update and real-time event logging, with support for full offline operation by the host panel.

MD-N32 RS-232 to TCP/IP Gateway

The MD-N32 is compatible With Rosslare's controllers AC-215, AC-115, Fingerprint Reader AYC-W6500, as well as intrusion alarm panels AuraSys and HomeLogiX.

ME00+031 Boards Tray Cabinet Housing

ME-00+031 Boards Tray Cabinet Housing The rack holds one 14 Ah backup battery as well as a power supply which powers all the connected units.

Metal Digital Access Control Keypad

PG-206K Metal Digital Keypad uses microcomputer processor which makes system steadier. With million combinations of key code, it is safe to open the door by key code and no key needed. This keypad supports door monitor, door release time control and other alarm functions. Beside, It can work with burglarproof or safety systems.   PG-206K:Metal digital access control keypad,1~7 door codes PG-206KC: Metal digital access control keypad,1~150 door codes

Metallic Gold Monochrome ribbon

  • Metallic Gold Monochrome ribbon Cassette
  • Number of prints per roll: up to 1000
  • Cards lifespan: up to 3 years

Metallic Gold Monochrome ribbon RCT016NAA

  • Metallic Gold Monochrome ribbon Cassette
  • Number of prints per roll: up to 1000
  • Cards lifespan: up to 3 years
  • Printers concerned: Edikio Flex, Edikio Duplex