LT-UVG-26A-3001 Bytes Glass Inlay Tags – 100 PK
LT-UVS-26A-3000 UHF Proximity Read/Write Card
Magnetic stripe card time attendance recorder
MatrixBUS™ MD-64 & MD-66 – Control Panel and Keyboard Voice Modules
MatrixBusTM XI-4 Four-zone Expansion Module
Main Features
• Four hardwire zone addition capacity
• Fail-safe and fail-secure option
• Supervised by panel for wire tamper
• On-board cover and wall tamper detection
• FLASH firmware upgradeable
• LED status and problem indicator
• Eight different options to connect wired detectors
PROFESSIONAL GRADE FEATURES
• Compatible with Rosslare’s AuraSys P6 wired
control panel and other MatrixBus accessories
• Cost effective and modular installation anywhere
on the bus near the devices to be controlled
• Jumper selectable zone addressing
MatrixBusTM XO-2 Tow PGM Expansion Module
Once the expansion module is connected to the MatrixBus, up to
two devices can be controlled by the relays via a dry-contact
rated at 12V 5A. Up to four relay Programmable Outputs (PGMs)
can be added to the system’s main board by using a two-PGM
expansions or one four-PGM expansion, giving the AuraSys P6
tremendous versatility.
MD-08 Wiegand to RS-232 Output Converter
MD-08 Wiegand to RS-232 Output Converter
The MD-08 is an easy-to-use Wiegand to RS-232 converter. It allows
you to connect a Wiegand reader directly to one of your PC's COM
ports. The MD-08 allows you to set employee and system codes
without having to use a reader attached to a controller in the network
MD-14U/62U USB Cables
MD-D02B 2-Reader Expansion Module for AC-225x-B Control Panel
MD-D02B is a plug-in expansion module for Rosslare’s AC-225x-B access control panels that provides a 2-reader interface, 4 supervised inputs with end-of-line (EOL) resistor protection, and 4 relay outputs (5 Amp Form-C N.O./N.C.) to the panel. Installation of the module takes under one minute with the tailored expansion port in the panels and auto-recognize by the panel. Once it is installed and the panel is powered on, the expansion is recognized by the AxTraxNG server, and the MD-D02B can be programmed for access control and automation. Advanced communication with the controller allows for firmware update and real-time event logging, with support for full offline operation by the host panel.
